SunBake® is a catalyst activated by Ultraviolet Light (UV). Specifically formulated for tough, bright polyester fiber reinforced SURFBOARD laminating. SunBake® is ideal for surfboard construction as it creates a much stronger and clearer product whilst reducing toxic emissions (volatile organic compounds) from your working environment.

SunBake allows for quicker and more cost effective production methods. It can be added to polyester resin in a similar way to commonly used peroxide based (MEKP) catalysts; hence no change is needed to your existing laminating procedure.

SunBakes® greatest advantage is the added strength it gives to your product. Ease and cost savings are also a huge bonus!

Shapers Australia's SunBake® is provided in liquid form to ensure the best possible dispersion. Each can is 200mls with a mix ratio of 1% (10mls per litre). Therefore each can of SunBake® effectively coverts 20 Litres of Resin.

Product Benefits:

• Variations in flex caused by variations in temperature, humidity and variations in the quantity of catalyst to suit such conditions, are eliminated! This gives a much more consistent flex ratio to your product. This is a big development for the surf industry two boards shaped identically can still surf very different just because of a variation of flex caused through glassing
• Unused resin can be reused. No more waste!
• Surfboards glassed in SunBake® will stay whiter and brighter longer than traditionally glassed surfboards.
• SunBake® catalysed polyester resin will not get brittle in time like other UV curing products can. The underlying point is that SunBake® makes strong surfboards that are stronger, look better and last longer.
• SunBake® can be mixed and used straight away. Unlike powder UV additives which need up to 48 hours to dissolve (depending on resin temperature). The advantage here is that a whole drum of resin does not have to be mixed at one time if you do not need to. For instance you may add 5ml of SunBake® to your 500ml of polyester resin, mix well and laminate as usual. When finished expose to UV light.
• SunBake® is perfect for experienced Glasser who can laminate quickly, reducing soak time and preventing too much resin soaking into the foam, thereby creating the best “strength to weight” product. Just fold the last lap and “cook her”.
• SunBake® has better ‘Cure-Through’ than other UV catalysts on the market today. This means it cures down through the resin further and stronger than other similar products. Guaranteeing curing under rice paper decals and thick build-ups around fins etc. This also makes SunBake® the best choice for those who use UV Lamps. 
• SunBake® used in sanding coats allows the Glasser to cut exposure time (3-4 minutes depending on UV levels) to a “Green” stage to allow sanding and fairing. Full curing can be finished with later stages i.e. gloss coat cure time of ten minutes means all previous layers that have not been fully cured, will be.
• Experienced Glassers can laminate and hot coat in a fraction of the time of conventionally glassed boards. This allows greater turn over of product and a superior use of available space. SunBake® can therefore give a small factory additional capacity.
• SunBake® is also great for the inexperienced Glasser .You have all the time in the world to get it right. When you are ready, expose to UV. Sunlight is free!