Found in Surfboard Shaping Bays all around the world.
Quality tool for taking out the thickness in the nose and tail of surfboards. Also used for shaping rails and concaves.
Ideal for foam shaping (finer shaping; especially with the Microplane replacement blade - 10"
Manufactured with a metallic-grey, die-cast alloy body
High-impact polymer handle holds up to heavy use
Fitted with a replaceable (10"/250mm) blade
Width - 1-5/8",41.28mm
Over all length - 315mm, 12-1/2"
The Stanley Surform planers are made of a die-cast metal alloy and come in two lengths: 6 inches and 12-1/2 inches. The 6 inch (Pocket) planer is a useful one-handed tool ideal for end-grain work and the 12-1/2 inch version is a resilient, two-handed tool, meant to file, cut and shave. These planers can be used directly on foam prior to sanding and are especially good for shaping the rail bands and other areas of the board where contours are needed. Both sizes come with a Stanley Surfom Fine Cut Blade, but we recommend using the Microplane replacements listed below.
