Shapers Seal Skin is made from a unique blend of active biodegradable chemicals, which remain active on the surface; therefore the treatment will never chip, crack, peel or discolour.
Shapers Seal Skin is very easy to use. Note: apply after the Surfboard has been finished to a minimum of 400# wet and dry. Simply apply Shapers Seal Skin to a Chux Cloth (as provided). Completely dampen the cloth and then wring out ensuring no excess/dripping. Apply in straight lengths to each side making sure that there is an even film covering the whole board. Once dry apply a second coat, followed by a single coat every 3-6 months. If buffing leave for a period of 48 hours and then use a cream polishing to bring up the shine.
Shapers Seal Skin finishes as well as using a finish coat resin. In addition it is a water-based product that contains no silicone and is therefore easily removed using a quality degreaser.
