Kinetix 125H Epoxy: Hardener (Slow)

$42.33 (Inc. GST)
$38.48 (Ex. GST)
(No reviews yet) Write a Review
SKU:
16-01-02
Shipping:
Calculated at Checkout
Kinetix 125H Epoxy: Hardener (Slow)

 HARDENER ONLY RESIN TO BE PURCHASED SEPARATELY

Kinetix 130H (Fast Hardener)

The 130 Hardener is design to match the production times of polyester resin. The 130 Hardener can be flipped within 3 hours and sanded within 5 hours @ 25°C, which is approximately half the turnaround time of the H125 Standard hardener.

The 130 Hardener has been especially formulated to give surfboard manufacturers the unique opportunity to make the epoxy surfboards to match the production times of polyester boards without compromising the clarity and whiteness of the surfboard

or

125H (Standard Hardener):

The 125 Hardener has been especially formulated to give surfboard manufacturers the unique opportunity to make the epoxy surfboards to match the the quality of polyester boards without compromising the clarity and whiteness of the surfboard. The 125 Hardener has high resistance to Yellowing and is formulated to prevent the effects of UV and time discoloration. 

The 125 Hardener has a slower curing time which makes it the perfect option for fabrication of aramaids/carbon fibre wet-lay-ups, vacuum bagging and resin infusion laminating methods.

 H125 and H130 hardeners will keep for 2 years if kept in original containers at room temperature (15OC to 32OC), and out of direct sunlight. Containers should be tightly sealed to prevent moisture absorption.

HEALTH AND SAFETY

Kinetix H125 and H130 hardeners have moderate sensitising potential, and should be kept out of the eyes and off the skin.

• Use with good ventilation and adequate safety equipment including impervious gloves and safety glasses.

• If skin contact occurs, remove contaminated clothing immediately, and wash the affected area thoroughly with ATL’s 845 hand cleaner and water, avoiding the use of solvents except in the case of massive contamination.

• If eye contact occurs, immediately flush with running water for at least fifteen (15) minutes and seek medical advice.

• If swallowed:
Resins - DO NOT induce vomiting, and contact a doctor or the Poisons Information Centre.
Hardeners - DO NOT induce vomiting, give plenty of milk or water and contact a doctor or the Poisons Information Centre.